Tuna popping is one of the most exciting ways to fish. But you need tough reels that are up to the task. Here's how to pick the right one.
When targeting yellowfin, bluefin, or giant bigeye tuna like this one, you need to have a spinning reel that’s up to the task.
Months of planning, weeks of preparation, days of travel, and hours of casting all culminate in a single moment. And when a triple-digit tuna explodes on a surface popper, the last thought in an angler’s head should be, “Do I have the right gear?”
Throwing huge poppers for massive tuna is a scenario that many anglers dream of. With improvements in braided lines and spinning reels, this endeavor has exploded in popularity over the last 20 years. To help make sense of all the options available in 2024, I’ve listed the top four factors I look into when choosing a spinning reel specifically for chasing these gargantuan pelagics.
Line Capacity vs Reel Weight
“You won’t catch anything when your lure is out of the water.” This painfully obvious quote from an old fishing mentor has stuck with me over the last 15 years. Throwing poppers can be extremely tiring and over the years I’ve noticed an obvious trend: The anglers who spend the most time casting catch more and better fish.
So when choosing a spinning reel an angler shouldn’t just pick the largest reel that holds the most line. Instead, it’s a compromise between weight and line capacity, with lighter reels being easier to cast for a longer period.
If the target fish weighs under 200 pounds, the 14000-class reel can perform beautifully. This size can hold around 450 yards of 50-pound braided line (packed on tightly), which should be plenty to tame a big tuna, combined with proper drag settings. At 25 ounces when fully spooled, the Shimano Stella SW 14000 offers a beautiful balance of weight to line capacity.
- Author’s Choice: Shimano Stella SW 14000 (25.5 ounces fully spooled)
- Best in Class: Shimano Saragosa 14000 (24 ounces fully spooled)
- Budget Choice: Shimano Twinpower SW 14000 (25 ounces fully spooled)
Drag Capabilities
When choosing a spinning reel for tuna, you have to look at several factors including line capacity and the amount of drag the reel is capable of producing. Capt Ray of ll Tackle world
Over the last few decades, reel companies have integrated ridiculous maximum drag capabilities into their reels. However, if you were to ask any seasoned angler you’d quickly learn that not all drag systems are created equal. A quality reel not only puts out tons of drag pressure but it does so with a silky-smooth operation that remains consistent over an extended fight.
Fishing reel drag systems work by creating friction, which inevitably produces heat. If a reel can’t effectively dissipate that heat, the drag will start to become “sticky.” This can lead to break-offs and pulled hooks. With fight times over 30 minutes commonplace when battling big tuna, the ability to maintain drag pressure over an extended period is critical.
It’s worth noting that very few scenarios, including tuna fishing, ever call for more than 30 pounds of drag, However, in my tests, I’ve maxed out my Daiwa Saltiga 14000 at a whopping 53 pounds. I’ve also marveled at its drag performance when fighting huge tuna, tarpon, and sharks.
- Budget Option: Penn Spinfisher VI 6500 (30 pounds maximum advertised drag)
- Best in Class: Daiwa Saltiga SW 14000 (55 pounds maximum advertised drag)
- Author’s Choice: Daiwa Saltiga SW 14000 (55 pounds maximum advertised drag)
- Honorable Mention: Shimano Saragosa SW 14000 (33 pounds maximum advertised drag)
Gearbox and Sealing
This prettiest car on the track can still come in last place. It’s what is under that hood that matters. With saltwater reels, we have to take it a step further and protect what’s under the hood from corrosion while simultaneously delivering smooth operation.
Gears, materials, seals, bearings, and bushings all matter. Corrosion can seize a bearing completely. Heat can cause a bushing in a line roller to hang up, causing a fish to break off. Under pressure from a good fish, the screws holding a gearbox in place can back out, causing the drive gear and pinion to grind against each other. In a high-intensity fight, many things can and do go wrong, so choosing a reel with quality components is crucial.
Typically I’ll look at three things here:
- What materials the main gear and pinion are made from?
- Where does the reel have bearings? I like to see them in the line roller, beneath the pinion, and at the handle entry point.
- Is there enough sealing around key areas like the line roller, gearbox, handle entry points, and above the pinion gear?
While stronger gearing exists, I’ve found that the Shimano Saragosa SW has a perfect blend of high-quality components, bearings where necessary, and sealing that is every bit as good as its more expensive counterparts.
Note: The best-of-the-best spinning reels will also include a backup anti-reverse clutch, which isn’t present in most 14000-class reels.
- Budget Option: Shimano Spheros SW 14000, which offers the same internals as Saragosa, minus the line roller design
- Best in Class: Daiwa Saltiga SW 14000, which has a Duralumin main gear, marine bronze pinion, magnetic sealing for smooth operation and backup anti-reverse
- Author’s Choice: Shimano Saragosa SW 14000, with a cold-forged aluminum main gear, brass pinion, and best-in-class sealing
Gear Ratio & Cranking Power
Spinning reels for tuna must be able to handle extended fights with big fish.
When popping for tuna, spinning reels with a high gear ratio reign supreme for three main reasons:
- To work a popper effectively, a reel is required to pick up all of the slacklines in between pops. To do this rhythmically and seamlessly, a reel that picks up 53 inches per turn of the handle will be much superior to a reel that only gains 40 inches per turn.
- When a school of tuna begins to blitz on bait, an angler sometimes only has seconds to reel up and cast. So the faster the reel can crank in the popper, the faster the angler can get it into the strike zone.
- Any angler who has fought a tuna species knows that the tuna may turn back towards the boat and completely slack the line at any point during the fight. The hook can easily come out when the tension drops. Therefore a reel with a high gear ratio is preferred to minimize any potential for slack.
It’s worth noting that a higher gear ratio is a double-edged sword. While it allows for more line to be gained per turn, it decreases the torque the reel can put out. So when a 200-pound tuna is pin-wheeling under the boat those cranks will most definitely be more difficult with a high gear ratio reel versus one with a lower gear ratio.
Here are some of my favorite high-speed spinning reels:
- Budget Option: Shimano Spheros SW 14000 (6.2:1 gear ratio, 53 inches of line retrieved per crank)
- Best in Class: Daiwa Saltiga SW 14000 (6.2:1 gear ratio, 53 inches of line retrieved per crank)
- Author’s Choice: Penn Slammer IV 6500 (6.2:1 gear ratio, 48 inches of line retrieved per crank)
In conclusion, selecting the right spinning reel is essential for enhancing your tuna-popping adventures. When purchasing a spinning reel for tuna fishing, prioritize features such as line capacity, drag capabilities, gearbox and sealing, gear ratio, and cranking power to ensure optimal performance and durability. By considering these critical factors, you can equip yourself with a high-quality spinning reel that is up to the task of landing trophy tuna and making your fishing experience truly unforgettable
2022 Shimano Stradic SW14000XG Offshore Casting Fishing Reel
Captain Ray and his son, Lucky Liam, have been dedicated to popping and jigging for bluefin and yellowfin tuna on the tuna grounds since 2011. Their passion for fishing alongside Captain John McMurray from One More Cast, a charter captain specializing in this incredible fishery, has allowed them to hone their skills and deepen their love for the sport. Join them on their thrilling adventures as they navigate the waters in pursuit of these magnificent fish.
